Description

Cisco WIC 1DSU-T1 V2 Card Overview: Cisco WIC 1DSU-T1 V2 Card are available at the best price in Pakistan from IT Networks PART NUMBER WIC-1DSU-T1-V2 Description Updated one-port T1/fractional T1 DSU/CSU WIC Router families supported 1700 (1720, 1721, 1751, 1760), 2600XMs, 2691, 3631, 3725, 3745, and ICS 7750 Wet T1 Capable Yes Short Cable Length Command Yes; used to configure attenuation for short cable lengths (<660 feet) Network Equipment Building Standards (NEBS) Yes: Type I/III Cisco IOS Software Release 12.2(15)ZL PCBU special [Cisco 1700 Series only] 12.2(17) Mainline 12.3(1) Mainline 12.3(1st)T Support on IAD2430 Series The IAD2431-8FXS, IAD2431-16FXS, IAD2432-24FXS, IAD2431-1T1E1 are supported on the following releases: 12.3(7)T4 12.3(8)T6 12.3(11)T2 Network clock participate was added, and is available in releases: 12.3(7)T6 12.3(8)T6 12.3(11)T2 Width (mm/in) 79/3.1 Height (mm/in) 21/0.8 Depth (mm/in) 122/4.8 Weight (g/lb) 62/0.14 Transmit bit rate 1.544 Mbps +/- 50 bps Receive bit rate 1.544 Mbps +/- 100 bps Line code AMI, B8ZS AMI ones Density Forced/bit robbing (N X56) High Level Data Link Control (HDLC) data inversion (N X64) Framing Format (SF) and ESF Output level (LBO) 0, -7.5, or -15 dB Input level +1 dB0 to -24 dB0 Data Rates N x 64 kbps (N = 1 through 24); nonchannelized N x 56 kbps (N = 1 through 24); nonchannelized Interface connector RJ-45 System timing Network and internal Loopbacks Network line loopback; user initiated Recessed push button for network line loopback; toggle on/off Network line loopback; telco initiated Network payload loopback Local date terminal equipment (DTE) loopback Remote line and payload loopback (codes: V.54 loop up, and loop down) Self-Test Self-Test activated by user Test patterns (BERT) 1:2, 1:5, 1:8, 3:24, QRW, All 0s, All 1s, user-programmable 24-bit patterns Network (T1) alarms Red alarm: Loss of network signal Blue alarm: Loss of network frame (AIS) from network Yellow alarm: Receive from network Performance reports and error counters Cyclic redundancy check (CRC), bipolar violation (BPV), OOF [EXPAND?], errored seconds, burst errored seconds, severely errored seconds, Ft and Fs framing errors for SF framing, FPS [EXPAND?] framing errors for ESF framing, 24-hour history stored in 15-minute increments LEDs CD (data carrier detect) LP (loopback) AL (alarm) Telnet/console Remote and local configuration, monitoring, and troubleshooting from Cisco IOS CLI SNMP Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network entity to user Standard MIB (MIB II) Cisco integrated DSU/CSU MIB RFC 1406 SNMP traps Generated in response to alarms Regulatory Compliance FCC Part 15 Class B TIA/EIA-IS-968 Industry Canada CS-03 Part II JATE Digital CAN/CSA-C22.2 No. 60950-00 UL 60950-2000 IEC/EN 60950 TS001 AS/NZS 3260 NEBS Type I/III Standards AT&T Pub 62411 ANSI T1.403 Operating temperature 0 to 40ºC (32 to 104°F) Storage temperature -20 to 65ºC (-4 to 149°F) Realative humidity 10 to 85 percent noncondensing operating; 5 to 95 percent noncondensing, nonoperating Get More Information Do you have any question about the Cisco Switch? For any query and details feel free to Contact us now via Live Chat Call or E-mail us at info@itn.com.pk.