Description

Cisco WS-C3560X-24P-S Data Sheet Analysis General Overview The Cisco WS-C3560X-24P-S is a high-performance managed switch designed for enterprise and advanced network environments. It offers robust Layer 2 and Layer 3 switching capabilities, making it suitable for both small and large networks. The switch is rack-mountable in a 1U form factor, allowing for efficient use of space in a data center or network closet. Key Specifications Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-C3560X-24P-S Product Type: Switch – 24 ports – Layer 3 – Managed Form Factor: Rack mountable – 1U Switch Ports and Connectivity Switch Ports: 24 x 10/100/1000 Ethernet Ports Power Over Ethernet (PoE): Yes, supporting PoE+ for higher power requirements of connected devices Interfaces: 24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 – PoE 1 x 4 PIN USB Type A 1 x console – mini-USB Type B – management 1 x RS-232 – RJ-45 – management 1 x 10Base-T/100Base-TX – RJ-45 – management Routing and Management Protocols Routing Protocols: OSPF stub EIGRP Stub PIM stub RIP-1, RIP-2 HSRP, VRRP, GLBP Static IP routing, RIPng Remote Management Protocols: SNMP 1, SNMP 2, SNMP 2c, SNMP 3 RMON 1, RMON 2, RMON 3, RMON 9 Telnet, TFTP, SSH, CLI Authentication and Security Authentication Methods: Kerberos Secure Shell (SSH) RADIUS TACACS+ Advanced Features Switching Features: Hot swap module replacement Layer 2 and Layer 3 switching Dynamic IP address assignment DHCP support Auto-negotiation, ARP support Trunking, VLAN support Auto-uplink (auto MDI/MDI-X) IGMP snooping Syslog support Traffic shaping Storm control (Broadcast, Multicast, Unicast) Rapid Spanning Tree Protocol (RSTP) support DHCP snooping Dynamic Trunking Protocol (DTP) support Port Aggregation Protocol (PAgP) support Access Control List (ACL) support Quality of Service (QoS) Jumbo Frames support MLD snooping Dynamic ARP Inspection (DAI) PoE+ Per-VLAN Spanning Tree Plus (PVST+) EIGRP Stub Routing Hardware and Power DRAM Memory: 256 MB Flash Memory: 64 MB Flash Status Indicators: Port status, link activity, port transmission speed, port duplex mode, power, system Expansion Slot(s): 1 (total) / 1 (free) x Expansion Slot Power Supply: Power Device: Power supply – redundant – plug-in module Installed Qty: 1 (installed) / 2 (max) Power Redundancy: Optional (1+1 with optional power supply) Voltage Required: AC 120/230 V (50/60 Hz) Features: Redundant Power System (RPS) connector Dimensions and Weight Width: 44.5 cm Depth: 46 cm Height: 4.5 cm Weight: 7.1 kg Rack Mounting Kit: Optional Compliance and Standards Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at Certifications: CE, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 System Software Software Included: Cisco IOS IP Base This switch is well-suited for businesses that need reliable and scalable network performance with a range of advanced features. Its support for PoE+ makes it ideal for environments with IP phones, wireless access points, and other PoE-powered devices. Additionally, its extensive support for various routing protocols and management features ensures it can be integrated into complex network setups.